Manufacturer for Laid Scrim China - Triaxial fiberglass net fabric laid scrims for aluminum foil insulation – Ruifiber

Laid Scrims Brief Introduction

Scrim is a cost-effective reinforcing fabric made from continuous filament yarn in an open mesh construction. The laid scrim manufacturing process chemically bonds non-woven yarns together, enhancing the scrim with unique characteristics.

Ruifiber makes special scrims to order for specific usages and applications. These chemically bonded scrims permit our customers to reinforce their products in a very economical manner. They are designed to satisfy our customers’ requests, and to be highly compatible with their process and product.

Non-woven laid scrim is widely applied in aluminum foil industry. It can help manufacture to develop the production efficiency as the roll length can reach 10000m. It also makes the finished product with better appearance.

Other usages: Textile roofing and roofing shields, Insulation and insulating material, Intermediate layer for vapor permeable underlay, air and vapor barriers (Alu and PE films), Transfer tapes and Foam tapes.

Fiberglass Laid Scrims Characteristics

1.Dimensional stability
2.Tensile strength
3.Alkali resistance
4.Tear resistance
5.Fire resistance
6.Anti-microbial properties
7.Water resistance

Fiberglass Laid Scrims Data Sheet

The regular supply of non-woven reinforcement and laminated scrim is 12.5×12.5mm,10x10mm,6.25×6.25mm, 5x5mm,12.5×6.25mm etc. The regular supply grams are 6.5g, 8g, 13g, 15.5g, etc.

With high strength and light weight, it can be fully bonded with almost any material and each roll length can be 10,000 meters.

Fiberglass Laid Scrims Application

a) Aluminum Foil Composite

Nove-woven laid scrim is widely applied in aluminium foil industry. It can help manufacture to develop the production efficiency as the roll length can reach 10000m. It also makes the finished product with better apperance.

b) PVC Flooring

PVC Flooring is mainly made of PVC,also other necessary chemical material during manufacture. It is produced by calendering,extrusion progress or other manufacture progress, it is devided into PVC Sheet Floor and PVC Roller Floor. Now all major domestic and foreign manufactures are applying it as the reinforcement layer to avoiding the joint or bulge between pieces, which is caused by the heat expansion and contraction of materials.

c) None-woven category products reinforced

None-woven laid scrim is widely used as reinforced materail on kinds none-woven fabric, such as fiberglass tissue, polyester mat, wipes, also some top ends, such as medical paper. It can makes none-woven products with higher tensile strength,while just add very little unit weight.