OEM/ODM Manufacturer Taping Non Tapered Drywall Joints - Fiber Reinforced Concrete Waterproof Fiberglass Mesh Tape For Drywall Self Adhesive Fiberglass Tape – Ruifiber

SPECIFICATION

Seaming drywall joints,for ceilings,for corners
Reinforce or repair wall cracks, plasterboard cracks, and cement board.
Fiberglass Mesh is based on the middle -strong alkaline or non-alkaline fiber glass loom woven fabric and finished after being coated with an organic material. It features a strong alkali-resistant and a high strength.Fiberglass Mesh Characters
1. Acid- resistant: It can exist in the wall for more than 60-70 years.
2. Heat Insulation: Mainly show as fire proof, most used in industry field and construction building.
3. High Strength: We use the best glue, and produce self of glue, so can keep the stability of the mesh.

APPLICATION

Usage: repair dry wall, gypsum board joints, all kinds of wall cracks and other wall damage

Application Method:

1. Kept wall clean and dry.

2. Attach tape in the cracks and compression.

3. Confirmed that gap has been covered tape, then use a knife to cut off it, at last brush on the plaster.

4. Let it nature dry, then gently polishing.

5. Fill enough paint to make it smooth.

6. Leaked tape removed. Then, pay attention to all cracks are properly repaired, with subtle seam of composite materials will complement the surrounding modified to make it bright and clean as new.

PACKING AND DELIVERY

Each Fiberglass self-adhesive tape is wrapped up in shrink film and then packed in a cardboard box, The carton are stacked horizontally or vertically onto pallets ,All pallets are stretch wrapped and strapped to maintain stability during transport.